sch2202 no.8043-1/6 applications ? low-frequency power ampli er, high-speed switch, motor drivers, muting features ? composite type with 2 npn transistor contained in a single package, facilitating high-density mounting ? ultrasmall package permitting applied sets to be small and slim ? small on-resistance (ron) speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo 20 v collector-to-emitter voltage v ceo 15 v emitter-to-base voltage v ebo 5v collector current i c 600 ma collector current (pulse) i cp 1.2 a collector dissipation p c mounted on a ceramic board (600mm 2 0.8mm) 0.4 w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7028-004 ordering number : EN8043b 62012tkim/72905 msim tb-00001689/n1504ea tsim ta-100992 sanyo semiconductors data sheet sch2202 npn epitaxial planar silicon transistor switching, driver applications http:// semicon.sanyo.com/en/network product & package information ? package : sch6 ? jeita, jedec : sot-563 ? minimum packing quantity : 5,000 pcs./reel packing type : tl marking electrical connection 1.6 1.6 1.5 0.05 0.5 0.05 0.56 0.25 0.2 0.2 1 3 2 64 5 1 : emitter1 2 : base1 3 : collector2 4 : emitter2 5 : base2 6 : collector1 sanyo : sch6 5 6 1 4 23 tl ef lot no. lot no. sch2202-tl-e
sch2202 no.8043-2/6 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =15v, i e =0a 100 na emitter cutoff current i ebo v eb =4v, i c =0a 100 na dc current gain h fe v ce =2v, i c =10ma 300 800 gain-bandwidth product f t v ce =2v, i c =50ma 330 mhz output capacitance cob v cb =10v, f=1mhz 3.2 pf collector-to-emitter saturation voltage v ce (sat) i c =200ma, i b =10ma 150 300 mv base-to-emitter saturation voltage v be (sat) i c =200ma, i b =10ma 0.9 1.2 v collector-to-base breakdown voltage v (br)cbo i c =10 a, i e =0a 20 v collector-to-emitter breakdown voltage v (br)ceo i c =1ma, r be = 15 v emitter-to-base breakdown voltage v (br)ebo i e =10 a, i c =0a 10 v turn-on time t on see speci ed test circuit. 30 ns storage time t stg 77 ns fall time t f 40 ns switching time test circuit ordering information device package shipping memo sch2202-tl-e sch6 5,000pcs./reel pb free and halogen free v r r b v cc =5v v be = --5v ++ 50 input outpu t r l 220 f 470 f pw=20 s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 =400ma 100 200 300 400 600 500 700 800 0 0.2 0.4 0.6 0.8 1.0 1.2 0 0 0.4 0.8 1.2 1.6 0.2 0.6 1.0 1.4 1.8 2.0 it05490 it05491 0 40 80 120 160 200 20 60 100 140 180 i b =0ma 0.1ma 0.2ma 0.3ma 0.4ma 0.5ma 0.6ma 0.7ma 0.8ma 1.0ma 0.9ma v ce =2v ta=75 c 25 c --25 c collector-to-emitter voltage, v ce -- v i c -- v ce collector current, i c -- ma base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- ma
sch2202 no.8043-3/6 1.0 23 57 10 23 57 100 23 57 1000 5 7 100 2 3 5 7 it05496 v ce =2v 1.0 23 57 10 23 57 100 23 57 1000 100 2 3 5 7 1000 2 3 5 7 10000 it05495 ta= --25 c 75 c 25 c 0.1 23 57 1.0 23 57 10 23 1.0 2 3 5 7 10 it05497 f=1mhz i c / i b =20 1.0 23 57 10 23 57 100 23 57 1000 10 2 3 5 7 100 2 3 5 7 1000 it05494 i c / i b =50 ta=75 c --25 c 25 c f=1mhz 0.1 0.1 it06067 7 5 3 2 10 7 5 3 2 7 5 3 2 1.0 100 3 2 57 3 2 57 1.0 10 out in 1k 1k i b 100 200 300 400 500 0 0 20 40 60 80 100 120 140 160 ambient temperature, ta -- c p c -- ta collector dissipation, p c -- mw it06712 mounted on a ceramic board (600mm 2 ? 0.8mm) 1unit f t -- i c collector current, i c -- ma gain-bandwidth product, f t -- mhz v be (sat) -- i c collector current, i c -- ma base-to-emitter saturation voltage, v be (sat) -- mv cob -- v cb v ce (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- ma output capacitance, cob -- pf collector-to-base voltage, v cb -- v ron -- i b base current, i b -- ma on-resistance, ron -- 1.0 23 57 10 23 57 100 23 57 1000 10 2 3 5 7 100 2 3 5 7 1000 3 5 7 100 2 3 5 7 1000 1.0 23 57 10 23 57 100 23 57 1000 it05492 it05493 v ce =2v i c / i b =20 ta=75 c --25 c 25 c ta=75 c --25 c 25 c collector current, i c -- ma h fe -- i c dc current gain, h fe collector current, i c -- ma v ce (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- mv
sch2202 no.8043-4/6 taping speci cation sch2202-tl-e
sch2202 no.8043-5/6 outline drawing land pattern example sch2202-tl-e mass (g) unit 0.004 * for reference mm unit: mm 0.4 0.3 0.5 0.5 1.4
sch2202 ps no.8043-6/6 this catalog provides information as of june, 2012. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
|
